Side Injection
Home > Products > Machines > Side Injection
  • LPMS 2200H Side Injection Dual Working Stations Air Over Oil Cylinder Compact MachineLPMS 2200H Side Injection Dual Working Stations Air Over Oil Cylinder Compact Machine
  • LPMS 2200HLPMS 2200H
  • LPMS 2200HLPMS 2200H

  LPMS® machines are engineered for low pressure molding, using specialty resins to encapsulate delicate parts, like automotive electronics, PCBA, coil, fiber-optic, LED lighting, cable, etc.

       The benefits of side injection is that when one large cavity being encapsulated from the center of the mold, which can prevent the gate mark from the center of product.


  •   7 liters melting tank is integrated into the machine.
  •   Side injection suitable for multiple cavity and large size part molding. Flexible from simple tools to complicated tools with slide blocks.
  •   Dual tank is more stable and improves the productivity.  
  •   Melt-on-demand tank melts the resin within 18 minutes.
  •   Air over oil cylinder gives larger clamp force for larger part.
  •   Key components adopt modular design, easy for maintenance and change.
  •   Four temperature control zones work independently. Over temperature alarm, automatic heating are included.  
  •   Two palm buttons and light curtain to protect the operator.
  •   Ejection system is equipped.


Machine Size / Weight

40.5 in x 45.28 in x 77.17 in / 1366 lbs


40.5 in x 45.28 in 

Working Station Height

33.47 in

Packing Size / Weight

44.49 in x 49.21 in x 81.10 in / 1455 lbs

Melting Tank Model & Q'ty


Auto Feeding System


Gun Model & Tip

LPMS-G02x2/ 36.4°

Heated Hose Model & Q'ty



200-240VAC / 1 Phase / 50 Hz

Temperature Control Zones


Temperature Range

Ambient up to 250℃  

Max .Power


Min. Air Pressure

0.5 MPa 

Air Consumption

0.18m3 / min


Air Over Oil Cylinder 

Clamping Force


Clamping Stroke

150 mm  

Control System

PLC+7 in HMI

Safety device

Light Curtain

Mold Set Size

9.06 in x 4.72 in x5.91 in / 55 lbs

Max . Mold Set Size

11.81 in x 7.87 in x 5.90 in 

Max . Part Size

2.36 in x 1.97 in x 0.71 in


Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

Tag:  Low Pressure Molding
Hits:  UpdateTime:2019-08-08 14:11:16  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2021