Side Injection
Home > Products > Machines > Side Injection
prev
next
  • KAPPA1000H Side Injection with Separate Tank ( Air Over Oil Cylinder )KAPPA1000H Side Injection with Separate Tank ( Air Over Oil Cylinder )
  • Injection GunInjection Gun
  • Air Over Oil CylinderAir Over Oil Cylinder

 

Application
  LPMS® machines are engineered for low pressure molding, using specialty resins to encapsulate delicate parts, like automotive electronics, PCBA, coil, fiber-optic, LED lighting, cable, etc.

  The benefit of side injection is that when one large cavity being encapsulated from the center of the mold, which can prevent the gate mark from the center of product. 

Features
  • Intuitive touch screen operation.
  • 7 liter melting tank. Multiple melting tank(s) is optional.
  • LPMS specially designed melt-on-demand tank can melt down the resin swiftly and evenly.
  • Air over oil cylinder gives large clamping force for larger parts.
  • The gear pump is made of hard-wearing material, which is stable, injection volume accuracy ±0.1g,maximum shot size is 5g/s.
  • Injection pressure range 1~50kg, which is controlled by the pneumatic safety valve. LPMS also have option like electronic safety valve, which means the injection pressure can be set more precisely from the PLC.
  • Over temperature alarm and automatic heating stop functions.
  • Safety light curtain and two safety buttons keep out of dangers for operator.
  • Equipped with ejection system.
Specification

Machine Size / Weight

970 mm x 970 mm x 1890 mm / 400 Kg

38.19 in x 38.19 in x 74.4 in / 882 lbs

Working Station Height      

850 mm  |  33.46 in

Packing Size / Weight  

1010 mm x 990 mm x 2120 mm / 440 Kg

39.76 in x 38.98 in x 83.46 in / 970 lbs

Melting Tank 

Melt on demand 7 liter x 1

Auto Feeding System

Optional

Gun Model & Tip

LPMS-G10 x 1 / 36.4° or 90° 

Heated Hose

1.2 m x 1

Electricity 

200-240VAC / 1 Phase / 50 or 60 Hz

Temperature Control Zones 

3

Temperature Range

Ambient up to 250°C / 485°F

Max .Power

4.5 Kw

Min. Air Pressure  

0.5 MPa  |  73 Psi

Air Consumption   

0.1m3 / min  |  3.5ft3 / min

Clamping      

Air Over Oil Cylinder

Clamping Force    

10 Tons

Clamping Stroke   

150 mm  |  5.91 in

Control System     

7”HMI , PLC controlled

Safety Protection  

Dual palm buttons , Light curtain , Emergency stop button

Mold Set Size

230~300 mm x 120~230 mm x 150 mm

9.06~11.81 in x 3.93~9.06 in x 5.91 in / 55 lbs

Machine dimension

 

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

Mold set dimension

 

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

※      LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.

分享到:
Hits:  UpdateTime:2016-08-27 09:02:24  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn