Vertical Injection
Home > Products > Machines > Vertical Injection
prev
next
  • LPMS800H Vertical Injection Air Over Oil Cylinder MachineLPMS800H Vertical Injection Air Over Oil Cylinder Machine
  • LPMS 800H Vertical Injection with Separate TankLPMS 800H Vertical Injection with Separate Tank
Application

  Our machines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.

  Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.

Features
  • Air over oil cylinder gives more clamping force for larger part.
  • User-friendly interface, 7" Touch screen operator with multi-language PLC.
  • Three thermal control zones for precise melt control.
  • Equipped with light curtain and dual palm buttons for operator safety.
  • Mechanical ejection system and control for pneumatic ejection.
Specification

Machine Size / Weight

940 mm x 840 mm x 1865 mm / 420 kg

37.01 in x 33.07 in x 73.43 in / 926 lbs

Footprint      

940 mm x 1700 mm  |  37.01 in x 66.93 in

Working Station Height      

1130 mm  |  44.49 in

Packing Size / Weight  

1200 mm x 1250 mm x 2000 mm / 455 kg

47.24 in x 49.21 in x 78.74 in / 1003 lbs

Melting Tank 

Melt on demand 7 liter x 1

Auto Feeding System

Optional

Maximum shot size      

5.8 g / RPM

Gun 

36.4° x 1

Heated Hose 

1

Electricity 

200-240VAC/1 Phase/ 50 Hz

Temperature Control Zones 

3

Temperature Range

Ambient up to 250°C / 485°F

Max .Power

4.5 Kw

Pump Motor 

120 W

Min. Air Pressure  

0.5 MPa  |  73 Psi

Air Consumption   

0.1 m3/min  |  3.5 ft3/min

Clamping      

Air Over Oil Cylinder

Clamping Force    

5 Tons (Option 10 Tons)

Clamping Stroke   

150 mm  |  5.91 in 

Control System     

7 ”HMI , PLC controlled

Ejector

Air Cylinder

Ejector Force

2515 N

Ejector Stroke

25 mm

Safety Protection  

Dual palm buttons, Light curtain

Mold Set Size

230 mm x120 mm x 150 mm / 25 kg

9.06 in x4.72 in x5.91 in / 55.12 lbs

Max . Mold Set Size     

300 mm x 200 mm x 150 mm

11.81 in x7.87 in x 5.90 in

Machine dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

Mold Set dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

※      LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.

分享到:
Hits:  UpdateTime:2016-08-18 15:21:37  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn