Pneumatic Drive
Home > Products > Machines > Pneumatic Drive
prev
next
  • LPMS200A Pneumatic Table Top Machine LPMS200A Pneumatic Table Top Machine
  • Equip with light curtain and protective cover.Equip with light curtain and protective cover.
  • Vertical injectionVertical injection
  • Touch Screen InterfaceTouch Screen Interface
Application
  Our machines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.

  Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.

Features
  • Table top machine and vertical injection.
  • Compact design with 1 liter melting tank integrated with machine.
  • Precise PID thermal control.
  • Designed specifically for PA adhesives.
  • Pneumatic cylinder clamping.
  • PLC control of timing and temperature.
  • Standard mold base self lock function is optional for large shot size.
Specification

Machine Size / Weight

625 mm x 605 mm x 865 mm / 36 kg

24.61 in x 23.82 in x 34.06 in / 79 lbs

Working Station Height      

N/A

Packing Size / Weight  

700 mm x 700 mm x 950 mm / 56 kg

27.56 in x 27.56 in x 37.40 in / 123 lbs

Melting Tank 

1 liter x 1

Auto Feeding System

Optional

Gun Model & Tip

36.4° x 1

Heated Hose 

N/A

Electricity 

200-240VAC / 1 Phase / 50 or 60Hz

Temperature Control Zones 

1

Temperature Range

Ambient up to 250°C / 485°F

Max .Power

1.8 Kw

Min. Air Pressure  

0.5 MPa  |  73 Psi

Air Consumption   

1.77 ft³ / min

Clamping      

Air Cylinder

Clamping Force    

0.4 Ton

Clamping Stroke   

25 mm  |  0.98 in

Control System     

PLC+ 5 in HMI

Safety Protection  

Light curtain, Protective cover

Mold Set Size

100 mm x 80 mm x 60 mm / 3.7 kg (Stee) ,1.2 kg ( Aluminum )

3.94 in x 3.15 in x 2.36 mm / 8.16 lbs (Steel),2.65 lbs(Aluminum)

Max . Mold Set Size     

120 mm x 100 mm x 60 mm 

4.72 in x 3.94 in x 2.36 in

Max . Part Size            

50 mm x 50 mm x 5 mm

1.97 in x 1.97 in x 0.20 in

Machine dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

Mold Set dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

※      LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.

分享到:
Hits:  UpdateTime:2016-08-18 15:30:57  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn