Vertical Injection
Home > Products > Machines > Vertical Injection
prev
next
  • LPMS800M Vertical Injection Dual Working Station MachineLPMS800M Vertical Injection Dual Working Station Machine
Application
  Our machines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.

  Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.

Features
  • Dual independent working station.
  • Separate 7 liter melting tank. Multiple melting tank is optional.
  • 7" touch screen interface with multi-language.
  • Omron and SMC components can be selected for reliability and international standards.
  • Five thermal control zones for precise melt control.
  • Equipped with light curtain and dual palm buttons for operator safety.
Specification

Machine Size / Weight

1300 mm x 780 mm x 1670 mm / 540 kg

51.18 in x 30.71 in x 65.75 in / 1190 lbs

Footprint      

1300 mm x 1700 mm  |  51.18 in x 66.93 in

Working Station Height      

850 mm  |  33.46 in

Packing Size / Weight  

1370 mm x 910 mm x1750 mm / 580 kg

53.94 in x 35.83 in x 68.90 in / 1279 lbs

Maximum shot size

5.8 g / RPM

Injection rate

5 grams / second

Melting Tank 

Melt on demand 7 liter x 1

Auto Feeding System

Optional

Gun 

36.4° x 2

Heated Hose Q'ty  

2

Electricity 

200-240VAC / 1 Phase / 50 Hz

Temperature Control Zones

5

Temperature Range

Ambient up to 250°C / 485°F

Max .Power

6 Kw

Pump Motor

120 W

Min. Air Pressure  

0.5 MPa  |  73 Psi

Air Consumption   

0.18 m3 / min  |  6.3ft3 / min

Clamping      

Air Cylinder

Clamping Force    

Max.1.2 Ton

Clamping Stroke   

150 mm  |  5.91 in 

Control System     

7 ”HMI , PLC controlled

Ejector

Air Cylinder

Ejector Force

2515 N

Ejector Stroke

25 mm

Safety Protection  

Dual palm buttons , Light curtain

Mold Set Size

230 mm x120 mm x150 mm / 25 kg

9.06 in x4.72 in x5.91 in / 55.12 lbs

Max . Mold Set Size     

300 mm x 200 mm x150 mm

11.81 in x7.87 in x 5.90 in

Machine dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

Mold Set dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

※      LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.

分享到:
Hits:  UpdateTime:2016-08-18 15:20:43  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn