Molding Material
Home > Products > Molding Material
prev
next
  • Automotive low pressure molding resinAutomotive low pressure molding resin

 

Polyamide hot melt resin characteristics
  • Protection after encapsulation
  • Excellent moisture resistance
  • Electrical insulation
  • Excellent impact resistant
  • Good chemical resistance
  • Good resistance to oil,acid,alkali
  • excellent flame resistance
  • UL94-0 approved
  • High and low temperature resistance
  • Good  thermal shock resistance,working temperature from -40 degree C to 150 degree C
  • Environmental protection
  • NO toxic fumes in process and ROHS compliant
  • Recyclable
  • Process benefit
  • Product design flexible
  • Stress release

 

 

Application

-40-+150℃

Color

Basic Amber , Black

Shore-hardness

A60-D50

Tensile strength at rupture

2.7-26 N/mm2

Elongation at rupture

300-800 %

Adhesion to

Most of plastics and selective metals

UL-listing

94-V0 are available of most hotmelt resin

Dielectric constant 

5-8 kHz

Volume resistivity

1011-1013 Ωcm

Dielectric strength 

20 to 45 KV/mm

Glass transition temperature

-20 t- -70℃

Softening point

120-200 ℃

Viscosity at 210℃ 

1500-13000 mPas

 

*Detail information please consults our specialist.


Tag:  resin hot melt resin polyamide
分享到:
Hits:  UpdateTime:2016-04-08 16:42:57  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn