Customized machines
Home > Products > Machines > Customized machines
prev
next
  • LPMS1000DF Hot Runner Large Clamp Force MachineLPMS1000DF Hot Runner Large Clamp Force Machine
  • Front and back slide moldFront and back slide mold
Application
  Specially designed for product dimensions about 600mmx600mm, injection volume over 250 grams. Break the record of the product maximum size and injection volume.   

  Our machines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.

  Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.

Features
  • Hot runner system eliminates runner resin and improve productivity.
  • Air over oil cylinder gives larger clamp force for bigger part.
  • Separate high volume melting tank.
  • 7 "in touch screen operator interface with multi-language PLC.
  • Four post die set for larger parts.
  • Equipped with light curtain and dual palm buttons for operator safety.
  • Ejection system is equipped.
Specification

Machine Size / Weight

86.81 in x 88.19 in x 120.08 in

Footprint 

86.81 in x 88.19 in

Working Station Height    

42.13 in

Melting Tank 

30 Liter x 3

Auto Feeding System

Optional

Gun 

Hot runner system

Each Station Gun Tip Qty

8,depends on part design

Heated Hose 

3

Electricity 

200-240VAC/1 Phase/ 50Hz

Temperature Control Zones        

18 according to the part

Temperature Range 

Ambient up to 446°F

Max .Power

25 Kw

Min. Air Pressure       

73 Psi

Air Consumption       

3.5 ft3/min

Clamping 

Hydraulic cylinder

Clamping Force

Max.150 Tons

Clamping Stroke        

5.9 in 

Control System 

PLC+7 in HMI

Safety Protection      

Light Curtain

Mold Set Size    

21.65 in x 23.662 in x 18.11in

Max . Part Size           

23.62 in x 23.62 in x 1.18 in

Machine dimension
Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product
Mold Set dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

分享到:
Hits:  UpdateTime:2016-07-06 16:46:20  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn