prev
next
Our machines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.
Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.
- 7 liter melt tank, which is separated from machine.
-
Low Pressure Molding process controlled by Programmable Logic Controller.
-
Human Machine Interface with multi-language (Chinese, English, French, German, Italian).
-
Three thermal control zones.
-
Mechanical ejection system and control for pneumatic ejection.
-
Two safety start buttons, light curtain to protect operator.
Machine Size / Weight |
970 mm x 970 mm x 1700 mm / 325 kg
38.19 in x 38.19 in x 66.93 in / 717 lbs |
Footprint |
970 mm x 1700 mm | 38.19 in x 66.93 in |
Working Station Height |
840 mm | 33.07 in |
Packing Size / Weight |
1010 mm x 990 mm x 1850 mm / 365 kg
39.76 in x 38.98 in x 72.83 in / 805 lbs |
Melting Tank |
Melt on demand 7 liter x 1 |
Auto Feeding System |
Optional |
Maximum shot size |
5.8 g / RPM |
Injection rate |
5 grams / second |
Gun |
36.4° or 90° x 1 |
Heated Hose |
L1 |
Electricity |
200-240VAC / 1 Phase / 50 or 60 Hz |
Temperature Control Zones |
3 |
Temperature Range |
Ambient up to 250°C / 485°F |
Max .Power |
4.5 Kw |
Pump Motor |
120 W |
Min. Air Pressure |
0.5 MPa | 73 Psi |
Air Consumption |
0.1m3 / min | 3.5ft3 / min |
Clamping |
Air Cylinder |
Clamping Force |
Max. 1.2 Tons |
Clamping Stroke |
150mm | 5.91 in |
Ejector |
Pneumatic |
Ejector Force |
980 N |
Ejector Stroke |
10 mm |
Control System |
7 ”HMI , PLC controlled |
Safety Protection |
Dual palm buttons , Light curtain |
Mold Set Size |
230 mm x 120 mm x 150 mm / 25 kg
9.06 in x 4.72 in x 5.91 in / 55 lbs |
Max . Mold Set Size |
300 mm x 200 mm x 150 mm
11.81 in x 7.87 in x 5.91 in |
Max . Part Size |
60 mm x 50 mm x 18 mm 2.36 in x 1.97 in x 0.71 in |
※ LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.
Tag:  低壓注塑機