Side Injection
Home > Products > Machines > Side Injection
prev
next
  • LPMS2000H Side Injection Dual Working Station Air Over Oil Cylinder MachineLPMS2000H Side Injection Dual Working Station Air Over Oil Cylinder Machine
  • working stations can work at the same time or independentworking stations can work at the same time or independent
  • Side injectionSide injection
  • Air Over Oil Cylinder,Max. clamping force 10TAir Over Oil Cylinder,Max. clamping force 10T
  • LPMS-G10 Injection Nozzle LPMS-G10 Injection Nozzle
Application

  Our machines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.

  Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.

Features
  • Dual independent working stations.
  • Separate 7 liter melting tank. Dual tanks is optional.
  • 7 liter melt on demand tank (Optional) : Melt-on-Demand technology accelerate the material melting rate within 18 minutes ( based on PA6208 which is hot melt adhesive, application temperature at 200 °C). 
  • User-friendly interface, 7" Touch screen with multi-language.
  • Air over oil cylinder gives bigger clamp force for large shot size.
  • Five thermal control zones for precise melt control.
  • Mechanical ejection system and control for pneumatic ejection.
  • Equipped with light curtain and dual palm buttons for operator safety.
Specification

Machine Size / Weight

1300 mm x 950 mm x 1865 mm / 610 kg

51.18 in x 37.40 in x 73.43 in / 1345 lbs

Footprint      

1300 mm x 1700 mm  |  51.18 in x 66.93 in

Working Station Height      

850 mm  |  33.47 in

Packing Size / Weight  

1370 mm x 1010 mm x 2010 mm / 650 kg

53.94 in x 39.76 in x 79.13 in / 1433 lbs

Melting Tank Model & Q'ty 

Melt on demand 7 liter x 1 

Auto Feeding System

Optional

Maximum shot size

5.8 g / RPM

Injection rate

5 grams / second

Gun Model & Tip

36.4°or 90° x 2

Heated Hose Q'ty 

2

Electricity

200-240VAC / 1 Phase / 50 Hz

Temperature Control Zones

5

Temperature Range

Ambient up to 250°C / 485°F

Max .Power

6 Kw

Pump Motor

120 W

Min. Air Pressure  

0.5 MPa  |  73 Psi

Air Consumption   

0.18 m3 / min  |  6.3ft3 / min

Clamping      

Air Over Oil Cylinder

Clamping Force    

Max.5 Tons (Option 10 Tons)

Clamping Stroke   

150 mm  |  5.91 in

Ejector   

Air Cylinder

Ejector Force

980 N

Ejector Stroke      

10 mm

Control System     

7 ”HMI , PLC controlled

Safety Protection  

Dual palm buttons , Light curtain

Mold Set Size

230 mm x 120 mm x150 mm / 25 kg

9.06 in x4.72 in x5.91 in / 55.16 lbs

Max . Mold Set Size     

300 mm x 200 mm x150 mm 

11.81 in x7.87 in x 5.90 in

Machine dimension
Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product
 
Mold Set dimension
Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

※     LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.

分享到:
Hits:  UpdateTime:2016-08-18 15:22:20  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn