Vertical Injection
Home > Products > Machines > Vertical Injection
prev
next
  • LPMS900MD Hot Runner Turntable MachineLPMS900MD Hot Runner Turntable Machine
  • Melt-on-demand tank and chiller is built-inMelt-on-demand tank and chiller is built-in
  • Turntable designTurntable design
  • Hot runner systemHot runner system
  • Built-in dual melt-on-demand tanks with auto-feeding systemBuilt-in dual melt-on-demand tanks with auto-feeding system
Application
  Our machines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.
 Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.

Features
  • Turntable design. One upper mold serves two bottom molds.
  • Melt-On-Demand tank melts the resin completely in 18 minutes, taking 6208 hot melt adhesive as example, temperature at 200 °C.
  • Equipped with dual 1 liter melting tank to fit different color resin or different model resin.
  • Hot runner system eliminates runner resin and improve productivity.
  • Built-in chiller.
  • The only independent dual dispensing low pressure molding system in the industry.
  • Injection pressure can be adjusted by the touch screen precisely.
  • Temp in different temp zones like tank, hose, hot runner, hot nozzles can be set independently.
  • Automatic feeding system and ejection system is equipped.
Specification

Machine Size (Width, Depth, Height) / Weight

1135 mm x 1442 mm x 1803 mm / 450 kg

44.69 in x 56.77 in x 70.98 in / 992 lbs

Working Station Height

850 mm  |  33.47 in

Footprint

1135 mm x 2100 mm  |   44.69 in x 82.67 in

Packaging Size (Width, Depth, Height) / Weight

1250 mm x 1560 mm x1850 mm / 500 kg

49.21 in x 61.42 in x 72.83 in / 1102 lbs

Melting Tank 

MOD-01-900MD-DSAF x 2

Auto Feeding System

Ultrasonic

Gun 

Hot Runner System

Each Station Gun Tip Q'ty

Std.4,depends on part design

Heated Hose 

2

Electricity 

200-240 VAC / 1 Phase / 50 Hz

Temperature Control Zones

9

Temperature Range

Ambient up to 250°C / 485°F

Max. Power

11 Kw

Min. Air Pressure

0.5 MPa  |  73 Psi

Air Consumption

0.1m3/min  |  3.53ft3 / min

Clamping Device

Air Cylinder

Clamping Force    

Max.1.2 Tons

Clamping Stroke   

75 mm  |  2.95 in

Ejector

Air Cylinder

Ejector Force

2515 N

Ejector Stroke

25 mm | 0.98 in

Tooling Temp Control

Build-In Chiller

Control System     

PLC+7 in HMI

Safety Protection

Light Curtain , Safety door

Standard Mold set Size/Weight

250 mm x 150 mm x 308mm / 75 kg

9.84 in x 5.91 in x12.13 in / 165 lbs

Max. Mold set Size      

300 mm x 200 mm x 308 mm 

 11.81 in x7.87 in x12.13 in

Machine dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

Mold Set dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

※     LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.

 

Vide

分享到:
Hits:  UpdateTime:2017-04-05 17:04:20  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn