Vertical Injection
Home > Products > Machines > Vertical Injection
prev
next
  • LPMS1000D Hot Runner Separate Tank MachineLPMS1000D Hot Runner Separate Tank Machine
  • Can install different sizes moldCan install different sizes mold
  • Melting system and machine is separated.Melting system and machine is separated.
  • Hot runner systemHot runner system
Application
  Our machines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.

  Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.

Features
  • Hot runner system eliminates runner resin and improve productivity.
  • 7 liter melting tank and machine is separate.
  • User-friendly interface, 7" Touch screen with multi-language.
  • Critical components(gear pump, valve and nozzle) are designed for PA adhesive and made overseas.
  • Equipped with light curtain and dual palm buttons for operator safety.
  • Ejection system is equipped.
Specification

Machine Size (Width, Depth, Height) / Weight

960 mm x 770 mm x 1720 mm / 320 kg

37.80 in x 30.32 in x 67.72 in / 705 lbs

Footprint      

960mm x 1700 mm   |  37.80in x 66.93 in

Working Station Height      

840 mm  |  33.07 in

Packing Size (Width, Depth, Height) / Weight

1010 mm x 870 mm x 1730 mm / 360kg

39.76 in x 34.25 in x 68.11 in / 794 lbs

Melting Tank 

Melt on demand 7 liter x1 

Auto Feeding System

Optional

Maximum shot size

5.8 g / RPM

Gun 

Hot Runner System

Each Station Gun Tip Q'ty

Std.4,depends on part design

Heated Hose 

1

Electricity 

200-240VAC / 1 Phase/ 50 Hz

Temperature Control Zones 

5 or according to the part

Temperature Range

Ambient up to 250°C / 485°F

Max .Power

6Kw / 7.5kw according to the part

Pump Motor

120 W

Min. Air Pressure  

0.5MPa  |  73 Psi

Air Consumption   

0.1 m3/min  |  3.5 ft3/min

Clamping      

Air Cylinder

Clamping Force    

Max.1.2 Ton

Clamping Stroke   

150 mm  |  5.90 in 

Ejector

Air Cylinder

Ejector Force

2515 N

Ejector Stroke

25 mm

Control System     

7 ”HMI , PLC controlled

Safety Protection  

Dual palm buttons ,Light Curtain

Mold Set Size

250 mm x 150 mm x 308mm / 75 kg

9.84 in x 5.91 in x12.13 in / 165 lbs

Max . Mold Set Size     

300 mm x 200 mm x 308 mm

11.81 in x7.87 in x12.13 in

Machine dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

Mold Set dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

※      LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.

分享到:
Hits:  UpdateTime:2016-08-18 15:21:17  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn