Side Injection
Home > Products > Machines > Side Injection
prev
next
  • BETA300 Side Injection Table Top MachineBETA300 Side Injection Table Top Machine
  • Side injectionSide injection
  • Auto-feeding system (optional)Auto-feeding system (optional)
  • Dryer machine (optional) Dryer machine  (optional)
Application
  Our machines are engineered for low pressure molding applications. Using specialty hot melt adhesive to encapsulate delicate parts.

  Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.

Features
  • Integrated design with 7 liter melting tank.
  • Melt-on-Demand technology accelerate the material melting rate within 18 minutes ( based on PA6208 which is hot melt adhesive, application temperature at 200 °C).
  • 7" Touch screen is user-friendly with multi-language.
  • Individual temperature control of tank and injection gun.
  • Over temperature alarm and automatic heating stop functions.
  • Safety light curtain and two safety buttons will protect workers during the operation.
  • Equipped with ejection system.
Specification

Machine Size / Weight

740 mm x 950 mm x 960 mm / 270 kg

29.13 in x 37.40 in x 37.79 in / 595 lbs

Working Station Height      

Optional

Packing Size / Weight  

800 mm x 1050 mm x 1170 mm / 300 kg

31.50 in x 41.34 in x 46.06 in / 661 lbs

Melting Tank Model & Q'ty

MOD-07-300 x 1  

Auto Feeding System

Optional

Maximum shot size

5.8 g / RPM

Injection rate

5 grams / second

Gun Model & Tip

LPMS-G02 x 1 / 36.4° or 90°

Heated Hose Model & Q'ty

N/A

Electricity 

200-240VAC / 1 Phase / 50 Hz

Temperature Control Zones

2

Temperature Range

Ambient up to 250°C / 485°F

Max .Power

5 Kw

Pump Motor

120 W

Min. Air Pressure  

0.5 MPa  |  73 Psi

Air Consumption   

0.1m3 / min  |  3.5ft3 / min

Clamping      

Air Cylinder

Clamping Force    

1.2 Tons

Clamping Stroke   

125mm (Option 150 mm)   |  Std.4.92 in  (Option 5.91 in) 

Ejector   

Air Cylinder

Ejector Force

980 N

Ejector Stroke      

10 mm

Control System     

7”HMI , PLC controlled

Safety Protection  

Dual palm buttons , Light curtain

Mold Set Size

180 mm x 100 mm x 150 mm / 16 kg  

7.09 in x 3.94 in x 5.91 in / 35.27 lbs

Max . Mold Set Size     

250 mm x 120 mm x 150 mm  |  9.84 in x 4.72 in x 5.91 in 

Max . Part Size            

50 mm x 45 mm x 7 mm  |  1.97 in x 1.77 in x 0.28 in

Machine dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

Mold Set dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

Machine Operation

※      LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.

分享到:
Hits:  UpdateTime:2017-04-05 16:42:53  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn