Vertical Injection
Home > Products > Machines > Vertical Injection
prev
next
  • LPMS1000DH Hot Runner Air Over Oil Cylinder MachineLPMS1000DH Hot Runner Air Over Oil Cylinder Machine
  • Vertical Injection Hot Runner with Separate Tank Vertical Injection Hot Runner with Separate Tank
  • Air Over Oil Cylinder, Max. clamping force 10TAir Over Oil Cylinder, Max. clamping force 10T
  • Hot nozzleHot nozzle
Application
    Our machines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.

    Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.

Features
  • Hot runner system eliminates runner resin and improve productivity.
  • Air over oil cylinder gives larger clamp force for larger part.
  • 7 liter melting tank and machine is separate.
  • User-friendly interface, 7" Touch screen with multi-language.
  • Equipped with light curtain and dual palm buttons for operator safety.
  • Ejection system is equipped.
Specification

Machine Size / Weight

970 mm x 790 mm x 1800mm / 400 kg

38.19 in x 31.10 in x 70.87 in / 882 lbs

Footprint      

970 mm x 1700 mm  |  38.19 in x 66.93 in

Working Station Height      

840 mm  |  33.07 in

Packing Size / Weight  

1210 mm x 900 mm x 2100 mm / 440 kg

47.64 in x 35.43 in x 82.68 in / 970 lbs

Melting Tank 

Melt on demand 7 liter x1 

Auto Feeding System

Optional

Gun 

Hot Runner System

Each Station Gun Tip Qty

Std.4,depends on part design

Heated Hose Q'ty 

1

Electricity 

200-240VAC/1 Phase/ 50Hz

Temperature Control Zones 

6 or 8 according to the part

Temperature Range

Ambient up to 250°C / 485°F

Max .Power

6Kw

Min. Air Pressure  

0.5MPa  |  73 Psi

Air Consumption   

0.1 m3/min  |  3.5 ft3/min

Clamping      

Air Over Oil Cylinder

Clamping Force    

Max.5 Tons (Optional 10 Tons)

Clamping Stroke   

150 mm  |  5.9 in  

Control System     

PLC+7 in HMI

Safety Protection  

Dual palm buttons ,Light Curtain

Mold Set Size

250 mm x 150 mm x 308mm / 75 kg

9.84 in x 5.91 in x12.13 in / 165 lbs

Max . Mold Set Size     

300 mm x 200 mm x 308 mm

11.81 in x7.87 in x12.13 in

Machine dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

Mold set dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

※      LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.

分享到:
Hits:  UpdateTime:2016-08-18 15:20:15  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn