Vertical Injection
Home > Products > Machines > Vertical Injection
prev
next
  • LPMS2000D Hot Runner Dual Working Station MachineLPMS2000D Hot Runner Dual Working Station Machine
  • Vertical Injection Dual Stations Hot Runner with Separate TankVertical Injection Dual Stations Hot Runner with Separate Tank
  • Dual working stationsDual working stations
Application
  Our machines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.

  Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.

Features
  • Dual independent working stations.
  • Hot runner system eliminates runner resin and improve productivity.
  • 7 liter melting tank and machine is separate. Multiple melting tank is optional.
  • User-friendly interface, 7" Touch screen operator with multi-language PLC.
  • Fifteen thermal control zones for precise melt control.
  • Equipped with light curtain and dual palm buttons for operator safety.
  • Mechanical ejection system and control for pneumatic ejection.
Specification

Machine Size

1300 mm x 800 mm x 1740 mm / 520 kg

51.18 in x 31.50 in x 68.50 in / 1146 lbs

Working Station Height

840 mm  |  33.07 in

Plant View

1300 mm x 1700 mm  |  51.18 in x 66.93 in

Packing Size

1370 mm x 930 mm x 1830 mm / 560 kg

53.94 in x 36.61 in x 72.05 in / 1235 lbs

Melting Tank 

Melt on demand 7 liter x 1

Auto Feeding System

Optional

Maximum shot size      

5.8 g / RPM

Gun 

Hot Runner System

Heated Hose 

2

Electricity 

200-240 VAC/ 1Phase / 50 Hz

Temperature Control Zones

11 or 15,depends on part design

Each Station Gun Tip Qty

2 or 4,depends on part design

Temperature Range

Ambient up to 250°C / 485°F

Max. Power

8Kw or 9.5Kw depends on gun tip quantity

Pump Motor 

120 W x 2

Min. Air Pressure

0.5 MPa  |  73 Psi

Air Consumption

0.18 m3 / min  |  6.35 ft³ / min

Clamping Device

Air Cylinder

Clamping Force

Max.1.2 Tons

Clamping Stroke

150 mm  |  5.91 in

Ejector

Pneumatic

Ejector Force 

980 N

Ejector Stroke

10 mm

Control System

7” HMI , PLC controlled

Safety Protection

Dual palm buttons ,Light Curtain

Standard Mold Set Size

250 mm x 150 mm x 308 mm / 75 kg

9.84 in x 5.91 in x12.13 in / 165 lbs

Max. Mold Set Size

300 mm x 200 mm x 308 mm 

11.81 in x 7.87 in x 12.13 in

Max. Part Size

60 mm x 50 mm x 18 mm  |  2.36 in x1.97 in x 0.71 in

Machine dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

Mold Set dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

※      LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.

分享到:
Hits:  UpdateTime:2016-08-18 15:16:07  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn