Vertical Injection
Home > Products > Machines > Vertical Injection
prev
next
  • LPMS2000DH Hot Runner Air Over Oil Cylinder Dual Working Station MachineLPMS2000DH Hot Runner Air Over Oil Cylinder  Dual Working Station Machine
  • Vertical Injection Dual Working Stations Hot Runner with Separate TankVertical Injection Dual Working Stations  Hot Runner with Separate Tank
  • Dual working stationsDual working stations
Application
  Our machines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.

  Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.

Features
  • Air over oil cylinder gives more clamping force for larger part.
  • Dual independent working station.
  • Hot runner system eliminates runner resin and improve productivity.
  • 7 liter melting tank and machine is separate. Multiple melting tank is optional.
  • User-friendly interface, 7" Touch screen with multi-language.
  • Fifteen thermal control zones for precise melt control.
  • Equipped with light curtain and dual palm buttons for operator safety.
  • Mechanical ejection system and control for pneumatic ejection.
Specification

Machine Size / Weight

1400 mm x800 mm x 1920 mm / 600 kg

55.12 in x 31.50 in x 75.59 in /1323 lbs

Footprint      

1400 mm x 1700mm  |  55.12 in x 66.93 in

Working Station Height      

905 mm  |  35.63 mm

Packing Size / Weight  

1470 mm x 960 mm x 2140 mm / 640 kg

57.87 in x 37.80 in x 84.25 in / 1411 lbs

Melting Tank 

Melt on demand 7 liter x 1

Auto Feeding System

Optional

Maximum shot size

5.8 g / RPM

Gun 

Hot Runner System

Heated Hose 

2

Electricity 

200-240VAC / 1 Phase / 50 Hz

Temperature Control Zones 

11 or 15,depends on part design

Each Station Gun Tip Q'ty

2 or 4 , depends on part design

Temperature Range  

Ambient up to 250°C / 485°F

Max .Power

9.5 Kw

Pump Motor

120 W x 2

Min. Air Pressure  

0.5MPa  |  73 Psi

Air Consumption   

0.18 m3 / min  |  6.3ft3 / min

Clamping      

Air Over Oil Cylinder

Clamping Force    

Max.5 Tons (Option 10 Tons)

Clamping Stroke   

150 mm  |  5.9 in  

Ejector

Air Cylinder

Ejector Force

980 N

Ejector Stroke

10 mm

Control System     

7 ”HMI , PLC controlled

Safety Protection  

Dual palm buttons ,Light Curtain

Mold Set Size

250 mm x 150 mm x 308mm / 75 kg

9.84 in x 5.91 in x12.13 in / 165 lbs

Max . Mold Set Size     

300 mm x 200 mm x 308 mm

11.81 in x7.87 in x12.13 in

Machine dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

Mold Set dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

 

※      LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.

分享到:
Hits:  UpdateTime:2016-08-18 15:21:01  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn