Vertical Injection
Home > Products > Machines > Vertical Injection
prev
next
  • LPMS500S Vertical Injection Servo Motor MachineLPMS500S Vertical Injection Servo Motor Machine
  • Self-contained tank without hose designSelf-contained tank without hose design
Application

  Our machines are engineered for low pressure molding applications.Using specialty resins to encapsulate delicate parts. 

 Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.

Features
  • Melt-On-Demand tank melts the resin completely in 18 minutes, taking 6208 hot melt adhesive as example, temperature at 200 °C.
  • Unique moving tank design eliminates the melt hose.
  • Servo motor makes clamping stable.
  • Modular design helps to replace or repair the components for melting system easily.
  • Fault self-diagnosis function, clear failure alarm display.
  • Individual temperature control of tank and injection gun.
  • Heating on time, high temperature alarm and heating stop automatically functions.
  • Extreme safety light curtain and photoelectric switch for operator safety.
  • Optional : Auto-feeding system and dryer machine enhance productivity.
Specification

Machine Size (Width, Depth, Height) / Weight

1000 mm x 1010 mm x 1820 mm / 350 kg 

39.37 in x 39.76 in x 60.43 in / 772 lbs

Working Station Height

850 mm | 33.46 in

Packing Size (Width, Depth, Height) / Weight

1100 mm x 1110 mm x 2050 mm / 400 kg 

43.31 in x 43.70 in x 80.71 in / 882 lbs

Melting Tank Model & Q'ty

Melt on demand 7 liter x 1 

Melt Capacity 

1.39 lbs / hr

Maximum shot size

5.8 g / RPM

Gun 

36.4° x 1 

Heated Hose Model & Q'ty

N/A

Electricity 

200-240VAC / 1 Phase / 50 Hz

Temperature Control Zones

2

Temperature Range

Ambient up to 250°C / 485°F      

Max .Power

5 Kw

Pump Motor

120 W

Min. Air Pressure

0.5MPa  |  73 Psi

Air Consumption

0.1 m3/min  |  3.5 ft3/min

Clamping

Servo motor  

Clamping Force

Max.1.2 Tons

Clamping Stroke

150 mm  |  5.91 in

Ejector

Pneumatic

Ejector Force

2515 N

Ejector Stroke

25 mm | 0.98 in

Control System

7 ”HMI , PLC controlled

Safety Protection

Light curtain, photoelectric switch   

Mold Set Size

230 mm x120 mm x150 mm / 25 kg

9.06 in x4.72 in x5.91 in / 55.12 lbs

Max . Mold Set Size

300 mm x 200 mm x150 mm | 11.81 in x7.87 in x 5.90 in  

Machine dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

Mold Set dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product

※      LPMS reserved the right of final explanation. Please forgive that if any change of products will not specify additionally.

分享到:
Hits:  UpdateTime:2016-08-18 15:20:29  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn