Side Injection
Home > Products > Machines > Side Injection
prev
next
  • LPMS 700H Side Injection Shuttle Table Compact Low pressure molding MachineLPMS 700H Side Injection Shuttle Table Compact Low pressure molding Machine
  • LPMS 700H C-Frame design with shuttle tablLPMS 700H C-Frame design with shuttle tabl
  • one upper mold serves two bottom moldsone upper mold serves two bottom molds
  • LPMS 700H Shuttle table reduces production time and is safe for operator.LPMS 700H Shuttle table reduces production time and is safe for operator.
Application

    Our Low pressure molding machines are engineered for low pressure molding applications. Using specialty hot melt adhesive to encapsulate delicate parts.

         Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.    
Features
  • C-Frame design with shuttle table, one upper mold serves two bottom molds.
  • Shuttle table reduces production time and is safe for operator.
  • Air over oil cylinder gives larger clamp force for bigger part. 
  • Self-contained 7 liter melt tank.
  • Modular injection system for ease of service.
  • Two temperature control zone work independently.
  • Over temperature alarm, automatic heating, stop heating functions are included.
  • Two safety start buttons, safety door to protect operator.
  • Equip mold cooling water route, cooling water can be used to put through.
  • Ejection system is equipped.
  • Optional: Auto-feeding system and dryer machine enhance productivity.

 

Specification

Machine Size / Weight

1380 mm x 1190 mm x 1690 mm / 470 kg

54.33 in x 46.85 in x 66.54 in / 1036 lbs

Footprint

1380 mm x 1190 mm |  54.33 in x 46.85 in 

Working Station Height

865 mm  |  34.05 in

Packaging Size / Weight

1480 mm x 1300mmx 1900mm / 520 kg

58.27 in x 51.18 in x 74.80 in / 1146 lbs

Melting Tank Model & Q' ty 

MT-07-700H x 1 

Auto Feeding System

Optional

Gun Model & Tip

LPMS-G02 / 36.4° or 90°

Heated Hose Model& Q' ty

N/A

Electricity 

200~240VAC / 1 Phase / 50HZ

Temperature Control Zones

2

Temperature Range 

Ambient up to 250°C / 485°F

Max. Power

4.3 Kw

Min. Air Pressure

0.5MPa  

Air Consumption

0.1m3 / min  |  3.5ft3 / min

Clamping Device

Air Over Oil Cylinder

Clamping Force

Max.5T ( Option 10T )

Clamping Stroke

75 mm   |  2.85 in

Control System

7 in HMI , PLC controlled

Safety Protection

Two safety start buttons, safety door

Standard Mold set Size/ Weight

180 mm x 100 mm x 150 mm / 16 kg

7.09 in x 3.94 in x 5.91 in / 35.27 lbs

Max. Mold set Size

250 mm x 230 mm x 150 mm

9.84 in x 9.06 in x 5.91 in    

Max. Part Size

100 mm x 90 mm x 18 mm  |  3.94 in x 3.54 in x 0.71 in   

 


Tag:  Low pressure molding machines
分享到:
Hits:  UpdateTime:2018-01-06 14:27:02  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn