Side Injection
Home > Products > Machines > Side Injection
prev
next
  • LPMS 370 Side Injection Shuttle Table Compact MachineLPMS 370 Side Injection Shuttle Table Compact Machine
  • LPMS 370 Shuttle table designLPMS 370 Shuttle table design
  • LPMS 370 one upper mold serves two bottom moldsLPMS 370 one upper mold serves two bottom molds
Application

       LPMS®  Low pressure molding machines are engineered for low pressure molding, using specialty resins to encapsulate delicate parts, like automotive electronics, PCBA, coil, fiber-optic, LED lighting, cable, etc.

       The benefits of side injection is that when one large cavity being encapsulated from the center of the mold, which can prevent the gate mark from the center of product. 

Features
  • Shuttle table design, one upper mold serves two bottom molds, which increases throughput and is safe for workers.
  • 7 liter melting tank integrated into machine without hose.
  • LPMS specially designed melt-on-demand tank can melt down the resin swiftly and evenly.
  • Injection pressure range 1~50kg, which can be controlled by the pneumatic safety valve. LPMS also have option like electronic safety valve, which means the injection pressure can be set more precisely from the PLC.
  • The gear pump is made of hard-wearing material,which is stable, maximum shot size is 5.8 g/s.
  • Modular injection system for ease of service.
  • Two temperature control zone work independently.
  • Over temperature alarm, automatic heating, stop heating functions are included.
  • Light curtain and photo-electricity sensor buttons protect workers during the operation.
  • Mold is easy to install due to LPMS’ standard mold base.
  • Ejection system is equipped.
  • Optional : Auto-feeding system and dryer machine enhance productivity.
Specification

Machine Size / Weight

990 mm x 874 mm x 965 mm / 400 kg

38.98 in x 34.41 in x 37.99 in / 881 lbs

Footprint

990 mm x 874 mm  |  38.98 in x 34.41 in

Working Station Height

N/A

Packing Size / Weight

1100 mm x 960 mm x 1165 mm / 470 kg

43.31 in x 37.80 in x 45.87 in / 661 lbs

Melting Tank

7 Liter x 1  

Shot size (only for reference)

5.8 g / RPM

Gun Model & Tip

LPMS-G02 / 36.4°or 90°

Heated Hose

N/A

Electricity 

200-240VAC / 1 Phase / 50 Hz

Temperature Control Zones

2

Temperature Range 

Ambient up to 250°C / 485°F

Max .Power

4.5Kw

Min. Air Pressure

0.5 MPa  |  73 Psi

Air Consumption

0.1m3 / min  |  3.5ft3 / min

Clamping

Air Cylinder

Clamping Force

Max. 1.25 Ton

Clamping Stroke

75 mm  

Ejector Force

Air Cylinder

Ejector Stroke

980 N

Control System

7”HMI , PLC controlled

Safety Protection

Light curtain and photo-electricity sensor buttons

Mold Set Size

180 mm x 100 mm x 150 mm / 16 kg

7.09 in x 3.94 in x 5.91 in / 35.27 lbs

Max. Mold Set Size  

250 mm x 120 mm x 150 mm

9.84 in x 4.72 in x 5.91 in  

Dimension

Macromelt,Thermelt,technomelt,Low pressure molding equipment,Low pressure injection molding equipment,Low pressure injection molding process,Low pressure injection,Low pressure injection glue,Low pressure molding glue,Low pressure molding tools,Low pressure molding molds,Low pressure molding product,Low pressure injection product


Tag:  Low pressure molding machines
分享到:
Hits:  UpdateTime:2018-01-06 11:34:10  【Printing】  【Close
All Rights Reserved © LPMS ICP:NO:12071842 技术支持:东莞网络公司【动点】
Share to:
Powered by MetInfo 5.3.2 ©2008-2020  www.metinfo.cn